Join our Mailing List
For the latest information on Code enforcement and administration, law and regulation changes, technical bulletins, information on other state agency actions related to Codes, product and equipment safety, and public hearing schedules, subscribe to our E-Bulletins
Some approved In-service Code training programs are available online. These courses are approved by DBSC.
Online training is recognized as an acceptable format and means of obtaining up to 24 hours of New York State Code Enforcement In-service Training annually.
|On this page, links to external web sites are indicated with the symbol . If you click on an external link, you will be leaving the Department of State (DOS) web site. These links are provided for your convenience. Our provision of these links does not constitute or imply (1) any warranty or representation by DOS regarding the accuracy of any information contained in any external web site or in any site linked from any external web site, or (2) endorsement or approval by DOS of any external web site or any site linked from any external web site, or any entity that owns or operates any external web site or any site linked from any external web site, or any opinion expressed or product or service offered in any external web site or in any site linked from any external web site. See the DOS disclaimer for further information regarding external links.|
Any costs incurred by participating in these programs are the responsibility of the participant.
The 2015 Training Regulations now require at least 3 hours of approved training in the following topics:
• Topic 1 - Code Enforcement and Administration
• Topic 2 - Uniform Fire Prevention and Building Code
• Topic 3 - Energy Conservation Construction Code
Although many courses may be available from the listed providers, only those programs specifically listed on this webpage have been pre-approved. Unapproved online classes can still be used toward Professional Development Electives.
|Concrete Repair Installation Topic 2 -2 hours||2|
|Concrete Repair Design Topic 2 -2 hours||2|
|Shear Wall Design with 2015 SDPWS Topic 2 - 2 hours||2|
|Soft Story Retrofit Topic 2 - 3 hour||3|
|Diaphragm Design with 2015 SDPWS Topic 2 - 1 hour||1|
|Wood, Steel and Concrete Deterioration Topic 2 - 1 hour||1|
|Deck Building - Beginner On-Line Course Topic 2 - 1 hour||1|
|Wind Design with ASCE 7 Topic 2 - 2 hours||2|
|Wind Design with the 2015 WFCM Topic 1 - 1 hour||1|
|Strengthening with Fiber-Reinforced Polymer Topic 2 – 1 hour
This course was formerly known as: Composite Strengthening of Structural Concrete Elements
|Boring and Notching in Wood Frame Construction Topic 1 - 1 hour||1|
|Wall Bracing for Wind Design with the 2015 IRC Topic 1 - 1 hour||1|
|Strengthening with Fabric-Reinforced Cementitious Matrix (FRCM) Topic 1 – 1 hour||1|
|Understanding Moment Frames Topic 1 – 2 hours||2|
For calendar year 2018, you must take online courses with a course code that begins with “NY18.” Please make sure to start and finish the course in the same calendar year. Do not restart courses from your Transcript from a previous calendar year. You will not get in-service credit for course codes that do not match the current calendar year.
|Course Title||Credit Hours|
|IS-100.b Introduction to Incident Command Systems, ICS-100
Topic 2 – 1 hour
|IS-200.b ICS for Single resources and Initial Action Incidents
Topic 2 – 1 hour
|IS-700.a NIMS An Introduction
Topic 2 – 1 hour